Elizabeth Kovar by Elizabeth Kovar
on

While there is no single right way to train clients who are overweight or have obesity, using regressions can be an effective method to employ. The ACE Integrated Fitness Training® (ACE IFT®) Model promotes stability and mobility prior to movement because movement must be executed properly before integrating load. Moving too quickly to the load phase may result in joint stress or injury if faulty movement patterns are present under heavy resistance. 

Functional resistance training and training for daily activities is an ideal method to ensure clients connect their exercise gains with life movements. It also helps ensure clients develop a positive connection to exercise. The key is to utilize “precursor” exercises, like the ones below, which benefit coordination, stability, mobility and motor control. 

When progressing a client to the next exercise, the length of time spent on each exercise depends upon on the individual’s movement abilities. When the client demonstrates excellent movement skills, he or she can progress to the next exercise. Sets and repetitions should be based on the client’s ability and the length of the training program. Below are exercises for obese clients and different progressions that you can use.

Bend and Lift Progression

Bend-and-lift progressions are commonly seen with squats. A squat progression is given below. 

Hip Bridge >

Lie on the floor with knees bent and feet flat. Lift the hips into the air and keep the arms on the floor.

Squat Up and Down from Bench >

Sit on a bench with arms positioned in front of the body. Lift the body into an upright position and return to the starting position.

Squat Up and Down From Bench While Holding TRX >

Hold TRX straps while sitting on a bench. Lift the body into an upright position while using the TRX for support. Return to the starting position.

TRX Squat >

With elbows under the shoulders, hold the TRX handles and stand upright. Lower the hips into a squat position with elbow extension. Return to the starting position.

Body-weight Squat >

Stand with arms at shoulder height in front of the body. Lower the hips into a squat position and return to center.

Squat With Light Load (e.g., Medicine Ball) >

Stand while holding a medicine ball in front of the chest. Lower the hips into a squat position.

Directional Change or Split Squat Stance

Perform a squat, rotate 45 degrees, then perform another squat. Repeat.

Squat

Single-leg Movement Patterns – Forward

Single-leg movement patterns are often associated with the lunge. However, in real life, forward movement is essential and the primary forward movement is gait.

Static Lunge >

Assume a lunge stance. Lower the back knee toward the ground. Return to the starting position and repeat. Complete sets on each side. 

Forward Weight Shifts >

From a standing position, step forward, load the front foot with weight and step back to center. 

Forward Walking >

Stand and walk forward, concentrating on core activation and posture. 

Suitcase Carries >

Place weights on the ground. Squat, pick up the weights and walk to another area.

Forward Alternating Lunges >

Stand with feet hip-distance apart. Lunge one leg forward while maintaining good upper-body posture and then return to the starting position. Alternate legs.  

Body-weight Step-ups With Both Feet on Platform >

Face a plyo-box and step the right foot on the bench, followed by the left. Step the right foot off the bench, followed by the left. Complete sets on each side. 

Steps-up With Hip Flexion

Stand with one foot on raised surface. Step up and raise the opposite leg to a 90 degree angle.

Step up with hip flexion

Single-leg Movement Patterns – Backward

Backward movement is essential for athletic and life pursuits. 

Static Lunge >

Assume a lunge stance and lower the back knee toward the ground. Return to the starting position and repeat. Complete sets with each leg. 

Backward Weight Shifts >

Begin standing and step back. Load the back foot with weight and step back to the starting position. 

Backward Alternating Touch Backs >

Stand with feet hip-distance apart. Extend the leg back, touching the ball of the foot on the ground. The knees should not bend like a lunge. Return to the starting position.

Backward Alternating Lunges >

Stand with feet hip-distance apart and lunge backward, bending the knees, while maintaining good upper-body posture. Alternate legs.

Backward Lunge With Forward Hip Flexion

This exercise will help you practice one-legged balance.

backward lunge

Push Progression

A push progression is an essential movement pattern during athletic pursuits. 

Smith Machine Push-up >

Adjust the Smith rack to desired height. Place the hands wider than the shoulders and perform push-ups. 

TRX Chest Press >

Adjust the TRX so that the handles hang about waist height. Start with feet in a split stance. Bend and extend the elbows while maintaining stability in the torso.

Push-up Against Gravity >

Perform a push-up either on the ground or by incorporating equipment.

Push-up With Legs on Stability Ball >

Place the stability under the quads (under shins are a progression) and perform push-ups. 

Push up on stability ball

Pull Progression

A pull progression is an essential movement pattern used to bring items toward the body. This requires adequate stability in the scapula as well as shoulder mobility. 

Upright Body-weight Rows With Foam Roller Behind Shoulder Blades >

Place a foam roll against the wall and position the roll under the shoulder blades. Perform a row motion with the arms. Progress using a resistance band for a greater challenge. 

Smith Machine Rows >

Adjust the Smith rack to desired height. Place the hands wider than the shoulders and perform rows.

TRX Rows >

Adjust the TRX so that the handles hang about waist height. and start with feet in a split stance. Bend and extend the elbows while maintaining stability in the torso.

Bilateral Rows >

With a resistance band or cable, position the body in either a seated or upright position. Perform rows while maintaining good posture.

Unilateral Rows With Bilateral Stance >

With a resistance band or cable machine, stand upright with feet shoulder-distance apart. 

Unilateral Rows With Unilateral Stance

Position feet in a unilateral stance, bending the front leg, keeping the back leg straight, and leaning forward slightly. Perform dumbbell row with the arm opposite of the front leg. Repeat on the other side.

Unilateral rows

Rotational Movement

Rotational movements increase thoracic mobility, hip mobility and strength in the torso region. 

Side Lunge With Torso Rotation >

Stand and lunge the left leg into a side lunge. Reach the right hand toward the left calf (rotating the torso slightly). Return to the starting position and repeat on both sides. 

Standing Rotation With Resistance Band >

Stand with feet shoulder-distance apart. Hold a band in front of the chest and rotate the torso using core strength. Complete sets on both sides.

Standing Cable Machine Rotation 

Stand sideways to a cable machine with your feet hip-width apart. Hold the cable handle relatively close to your body slightly below chest height, positioning your hands at the midline of your body. Engage your abdominal muscles to brace your torso. Keeping your torso vertical to the floor, pull your shoulder blades down your back without arching your low back.

Standing cable machine rotation

CPR/AED Smart Certification App

Get CPR Certified Anywhere,
Anytime in Just 90 Minutes or Less